Why Does My Laptop Keep Going Into Hibernation Mode?

Hibernation mode is when your computer shuts down and stores data on the hard drive in a low-power state until you re-start it again. This can make the laptop very slow, so if you have this problem or have any other laptop problems check out our article! Laptop users with hibernating issues will be able to find some information about what might be causing this issue after reading through our article. We’ll also provide top tips for preventing this issue.

After reading through our article, you should be able to find a solution to your problem with hibernation mode on your laptop!

What is a Laptop Hibernating Mode?

Laptop hibernating mode is a state of the laptop that allows the laptop’s power to be used as a backup source in case of a power outage. A laptop hibernates mode is a sleep mode that saves the computer’s state so it can be reopened later.

When a laptop enters into hibernation mode, all applications and open files are closed. The power supply to the system is turned off during hibernation, which conserves energy. Laptop hibernate modes can be set on a schedule or activated manually when needed.

A laptop in hibernation mode will still use power if its battery is low, but will enter into deeper sleep if the battery becomes fully depleted. To resume from a laptop in hibernation mode, press the power button and restart the computer as usual. Laptops can be set to hibernate automatically at a certain time of the day or week. When laptops are in hibernation, they use less power than when they are running normally and they take up less space on the hard drive.

Why Does My Laptop Keep Going Into Hibernation Mode?

There are a few reasons why your laptop might be going into hibernation mode constantly. It’s possible that your laptop is going into hibernation mode because of a misconfiguration on your Windows operating system especially for Laptops running Windows 10. This problem can also be caused by corrupted system files, incorrect Power Plan settings, or an incompatible driver. In this case, the issue is caused by corruption in the System File. The solution is to disable hibernation and reconfigure your Power Plan settings.

Windows 10 laptops go into hibernation mode when the screen is locked or when the computer is turned off. To configure Windows 10 to keep the screen on longer, you must turn off power saving features. If you want to disable hibernation completely, you can do so in Windows 10 using a registry hack.

Windows 10 laptop going into hibernation mode is usually caused by a hardware problem. This usually happens when your laptop is turned off but it shouldn’t be turned off. There are several ways to fix this issue, and we’ve outlined them in our article.

How To Stop Your Laptop From Constant Hibernation or Going To Sleep

1. Run the Windows 10 Power-Troubleshooter

Windows 10 includes a troubleshooter that can diagnose and fix problems with the device.

  1. Navigate to the Control Panel.
  2. Enter “Troubleshooting” in the search bar.
  3. On the left pane of the “Troubleshooting” box, click “View All.”
  4. Select “Power”.
  5. Now Select “Advanced,” and then “Run as Administrator.”
  6. To finish the troubleshooting procedure, click “Next” and follow the on-screen directions.

2. Disable the Fast startup option

Windows 10 has a fast startup feature that was designed to make the computer start up faster. However, this feature can sometimes cause problems with hibernation and Windows 10 won’t come out of hibernation. To fix this problem, you can either enable or disable the fast startup feature.

Fast startup is a feature in Windows that helps your computer startup faster after shutting down. While this can be helpful, it can also cause problems with certain programs. If you’re having trouble with a specific program, you may want to try disabling the fast startup option. To do this, open the Control Panel and search for “Power Options.” On the left side menu, select “Choose what the power buttons do.” Under “Shutdown settings,” uncheck the box next to “Turn on fast startup (recommended).” Click “Save changes” and restart your computer.

3. Reset your computer Power options to Default Settings

Resetting your computer’s power options to the default settings can help fix hibernate problems. First, check to see if there is a problem with the current power plan configuration. If so, you can reset it or start with a new one. Resetting your computer’s power options will also turn off all unused devices and restore your system to its factory settings.

4. Update your Device Display Driver

Windows 10 does not resume hibernation, this issue may be related to a driver problem. Make sure the Installed display driver / Graphics driver is updated and compatible with the current windows version. If updating your drivers resolves the issue, well and good, else you may try the next steps. If still have the same hibernate problems then you might have a compatibility issue

5. Disable Automatic Sleep & Shutdown Mode

To disable automatic sleep and shutdown mode, visit the system’s “Sleep” and “Hibernate” settings. To enable automatic sleep and shutdown mode, check the box next to “Hybrid Sleep.”

6. Disable Hibernation mode Completely

Hibernation is a power-saving mode that saves the state of your laptop to the hard drive before turning itself off. If you disable hibernation, all work will be lost once the laptop turns back on after disabling hibernation. To disable hibernation, click on the search box next to the start menu and type in CMD.

In Windows, hibernate mode is available in all versions. You can disable hibernation through the command prompt by right-clicking and selecting “Run as administrator.” If you want to change the hibernation time, you can go to Advanced Settings and make the changes there. Additionally, a hibernate-like deep sleep option is available on Macs through the Terminal.

How to stop my Windows laptop from Hibernating?

There are a few ways to stop your laptop from hibernating. The first is to make sure that your power settings are configured to not put the computer to sleep. You can also disable the hibernation feature in Windows. To do this, open up Control Panel and go to Power Options. From there, click on “Change what the power buttons do” and then select “Never Hibernate.” Finally, you can try updating your BIOS or driver software.

Microsoft has been trying to fix the various Windows 10 hibernation problems for a while now. If your laptop keeps going into hibernation mode, here are some solutions that might help. Type the following command in Command Prompt with admin privileges and hit enter key: powercfg -h off

command to disable hibernate option

How to wake your laptop from hibernation

There are a few reasons why your laptop might be going into hibernation mode. One possibility is that your power settings are configured to put the computer to sleep after a certain amount of time. Another possibility is that there are corrupted system files on your computer, which can cause various issues, including the computer not resuming from hibernation. If you’re having this issue, try some of the solutions listed in this article.

When a laptop goes into hibernation mode, it saves the state of its current operations to the hard drive and completely turns off. To start it up again, you have to remove the power code (charging adapter) and battery. After that, press and hold the power button for 30 seconds or more until the computer starts up. If there is still no response, completely discharge the power and install the battery before trying again.


Thus, after going through all of the ways outlined, you should be able to prevent your laptop from sleeping, hibernating randomly, or shutting down after a period of inactivity. Leave a comment below to let us know which approach you utilized.


Why does my computer hibernate on its own?

There are a number of reasons why your computer might be hibernating on its own. Here are some of the most common solutions:

  1. Make sure that your computer is set to automatically resume from hibernation.
  2. Try updating your BIOS and drivers.
  3. Disable fast start-up in Windows 10.
  4. Check for third-party software conflicts.

What causes Windows to hibernate?

Windows hibernates when it’s not being used because the default settings on the operating system are configured to do so. This can be changed, however, so that your computer stays on when you close the lid. The most common reason Windows hibernates is due to misconfigured settings, but there are a variety of reasons why it might happen.

Windows hibernation is a power-saving state that allows your computer to sleep and resume quickly. Many users have reported problems with Windows 10 won’t come out of hibernation, Windows 10 froze on resume from hibernation or laptop freezing on resume from hibernation. If you are having this problem, try the solutions in this article. You can disable the function to stop your laptop from hibernating.

How do I disable hibernate in Windows 10?

Hibernation is a process that saves your computer’s state information to disk so that it can resume quickly. It was originally created as a way to conserve energy on laptops, but some people find that disabling hibernate resolves issues they are experiencing with their PC. To disable hibernate on your PC, open Command Prompt with admin privileges and type the command “powercfg -h off”.